HeadRush - FRFR-108 MKII Full Range/Flat Response 1x8 Powered Cabinet

PERFECT PARTNER FOR AMP MODELERS
If you're new to FRFR amplifiers FRFR stands for "full-range flat-response." This special type of ampli-fication is very important for amp modeling pedals and pedalboards, as your amplifier needs to sound pure and transparent, so it can deliver a true "amp in the room" sound without coloring it as a traditional guitar amp would. The FRFR-108 MKII is precision-designed to get the most out of your modeler and deliver all the intricacies of your amp and cab emulations, with enough volume to be ready for any stage, rehearsal or jam session.

PURE AND POWERFUL TONE
FRFR-108 MKII outputs a massive 2000 watts, which means you have enough headroom for almost any performance or rehearsal. Featuring a specially voiced 8-inch woofer and high-frequency compression driver, the FRFR-108 MKII delivers a precise, full response across the entire frequency range, without any artificial colorationwhich is critical to getting the most out of your amp modeler. The FRFR-108 MKII's performance is exceptional, with max 129dB SPL and 46-22kHz frequency range.

ALL THE CONNECTIONS YOU NEED - INCLUDING BLUETOOTH®
FRFR-108 MKII features two combo XLR + 1/4" combo inputs for connecting your amp modeling pe-dal or pedalboard, each with their own independent volume controls. You can also wirelessly connect a mobile device to the FRFR-108 MKII via Bluetooth, so you can stream music wirelessly at rehearsal or during set breaks. There is also an XLR output for chaining more than one speaker together or sending the signal from your FRFR out to a front of house mix.

ADAPTS TO ANY STAGE OR ROOM
Stages and rehearsal rooms can easily become dense and muddy sounding as lower frequencies from different instruments battle each other; FRFR-108 MKII has a HPF cut switch to quickly pull those trouble-some frequencies out and make sure your tone sits perfect in the mix. Unwanted electrical noise can also be a common problem; FRFR-108 MKIIs ground lift switch can eliminate hums and buzzes resulting from ground loops.

ROAD-READY LIGHTWEIGHT DESIGN
FRFR-108 MKII is rugged yet lightweight and easy to transport (at 21 lbs / 9.53 kg) making one trip load-ins at the gig or rehearsal space easier than ever. While you can use FRFR-108 MKII in its intended wedge position, its versatile design means that it can also be used in an upright or pole-mounted position, making it easier to direct your sound wherever you need it, which is especially helpful at outdoor gigs or other places where PA backline is limited.

POWERFUL, PROFESSIONAL SOUND
2000 watts of peak power ensures you have enough headroom for almost any live performance or re-hearsal.

PRECISION-TUNED FOR AMP MODELERS
The cabinet design, 8" woofer, and HF compression driver are specially voiced for accurate, linear deliv-ery of amplifier and cabinet emulations.

BLUETOOTH® ENABLED
Stream music wirelessly from your mobile device into FRFR-108 MKII's dedicated Bluetooth® channel.

ALL THE CONNECTIVITY YOU NEED
Two combo XLR + 1/4" inputs with independent volume controls and an XLR direct output allow for chaining speakers or sending to a front-of-house mix.

QUICKLY ADAPTS TO VENUES AND ROOMS
FRFR-108 MKII has a ground lift switch for eliminating noise issues caused by ground loops and a HPF EQ switch to help cut through muddy stage mixes.

LIGHTWEIGHT, FLEXIBLE AND STURDY
Weighing just 21 lbs / 9.53 kg, FRFR-108 MKII is rugged yet easy to transport and can be used in a wedge, upright, or pole-mounted position.

Specifications
Output Power: 2000 W
Drivers: Low-Frequency: 8.0" (203 mm) driver, 2.0" (50 mm) high-temperature voice coil. / High-Frequency: 1.0" (25 mm) exit ceramic driver with 1.4" (35 mm) coil.
Crossover Frequency: 2 kHz
Maximum SPL: 129 dB (peak) dB-SPL @ 1 m
Frequency Response: 62 Hz 20 kHz (+/-3 dB)
Frequency Range: 52 Hz 20 kHz (-10 dB)
Horn Coverage: 90° horizontal x 60° vertical (nominal)
Connectors: (2) XLR+1/4" (6.35 mm) TRS combo inputs (Balanced) / (1) XLR output (Link) / (1) IEC power cable input
Input Impedance: Line: 10 K? balanced, 20 K? unbalanced
Gain/Volume Control Range: 0 dB, +4 dBu nominal, +10 dBu for max output
HPF Switch: 100 Hz
Protection: Electronic clip, thermal, and transducer overdrive protection
Mounting/Installation: Standard 36 mm pole socket
Operating Temperature: 14°F to 113°F / -10°C to 45°C
Dimensions (width x depth x height): 10.1" x 9.6" x 17.2" (256 mm x 245 mm x 436 mm)
Weight: 21.05 lbs. (9.5 kg)

Power
- Connection: IEC
- Input Voltage: 100-120V, 50/60 Hz; 220-240V, 50/60 Hz
- Consumption: 1100W
- Fuse: T15AL AC250V; 220-240V T6.3AL AC250V