AKG - C314 Matched Pair Stereo Set

Perfect twins

The AKG C314 professional multi-pattern condenser microphone belongs to one of the industry's most widely used studio and stage microphone families, designed for enthusiasts and professionals alike. It has advanced features that help artists fine-tune their signature sound, such as four selectable polar patterns, a high class, self-noise level and an overload detection LED. Using the same one-inch dual diaphragm capsule as the C414 XLS, musicians, engineers and producers can have the confidence that their audience will experience every subtle nuance as it was intended.

Realistic stereo recordings require microphones with outstanding performance and excellent quality. It also requires performance consistency and accurate localization from the pair of microphones. Therefore, every factory-matched pair of C314s is created from thousands of individual microphones selected by AKG's sophisticated computer-aided matching method. The result is the highest possible correlation over the whole frequency range and virtually identical sensitivity for stunning, three-dimensional recordings.

Four selectable polar patterns
The versatile C314 is the multi-instrumentalist in your microphone rig, ready to fill in wherever needed. Whether it's cardioid, supercardioid, omni or figure-8 polar patters, there are plenty of ways to get the most natural sound from any instrument - electric and acoustic guitars, drums, and much more. Employ a supercardioid pattern to reduce drum spill, then quickly switch to a figure-8 pattern to balance out two vocalists. These easy-to-access options make the AKG C314 a great addition to any studio with limited space.

Overload detection LED and bass-cut filter
With a variety of thoughtful extras, the AKG C314 empowers you to make better recordings, hands down. When acting as both artist and engineer, its overload detection LED makes it easy to see when your input levels are too high. This helps you take full advantage of the mic's huge dynamic range, and only engage the pad when necessary. Its bass-cut filter, too, helps you curb rumbles, vibrations and loud, boomy sounds, and minimizes the proximity effect for balanced recordings.

In the Box:
2 x C314 Microphones
2 x W214 Windscreens
2 x H85 Universal Shock Mounts
2 x SA60 Stand Adapters
1 x H50 Stereo Bar
1 x Metal Carrying Case

General Specifications
Audio frequency bandwidth: 20Hz - 20kHz
Equivalent noise leve: l8 dB-A
Sensitivity: 20 mV/Pa
Signal to Noise: 86 dB-A
Preattenuation Pad: -20 dB
Bass cut filter: 100 Hz, 12dB/octave
Electrical impedance: 200 Ohms
Recommended load impedance: 1000 Ohms

Audio Output
Type: Balanced XLR
Gender: Male
Contacts: 3-pin

Powering Interface
Voltage: 44 to 52 V
Current: 3 mA