Description
Drum Amplifier Strike Amp 8, 2000 watts, 1×8” Speaker
The electronic drum amplifier Strike Amp 8 is your ideal practice companion. It features an 8-inch bass speaker and a built-in mixer. Do you want to invite friends to play? The Strike Amp 8 cuts through the mix so you won’t get drowned out by your fellow musicians. Whatever the situation, Alesis Drums’ Strike Amp Series is the ultimate choice for powering your drum kit.
2000 watts of power and clarity
With 2000 watts of explosive bi-amplified power and high-performance transducers, this speaker will always play loud and clear, in any space, in any situation – whether you’re performing, recording, or rehearsing. The powerful 8-inch low-frequency speaker really adds the “kick” to the kick drum.
The best amplifier to power your drum kit!
The Strike Amp 8 has all the features and versatility needed to fit in anywhere, and it’s easy to set up and use. You can use it vertically or tilt it horizontally like a stage monitor. There is an XLR output to connect another Strike Amp 8 or send your performance to another input device. Do you need to customize the sound to get the “right tone”? Use the Contour EQ control. And the (2) combo XLR/TRS 1/4″ inputs with independent volume controls and clip indicator mean that the versatility of connections is virtually limitless, and you won’t risk overloading the speaker unknowingly.
Features:
– 2000 watts of peak power deliver clarity, punch, and more than enough headroom for any performance or practice space.
– The specially designed 8-inch woofer and high-frequency compression driver deliver the sounds of your drum kit with precise and full-range response across all frequencies, without any artificial coloration.
– (2) Combo XLR/TRS 1/4-inch inputs with independent volume controls and clip indicator
– XLR output to connect another Strike Amp 12 or send your performance to another input device.
– Lightweight and flexible tilt-back cabinet design that can also be pole-mounted.
– Contour EQ switch to control your sound.
– The Ground-Lift switch eliminates unwanted noise.
– Includes IEC power cable.
Specifications:
Output Power: 2000 W (Peak, 1300 LF + 700 HF), 1000 W (Continuous RMS, 650 LF + 350 HF)
The Conductors:
– Low-frequency driver: 8.0″ (203 mm) woofer, high-temperature 2.5″ (65 mm) voice coil.
– High-frequency driver: 35 mm neodymium driver with precision waveguide.
– Crossover frequency: 2.5 kHz
– Maximum SPL: 129 dB (peak), 126 dB (continuous) (dB-SPL @ 1 m)
– Frequency response: 62 Hz – 20 kHz (+3 dB)
– Frequency range: 52 Hz – 22 kHz (-10 dB)
– Horn coverage: 90 degrees horizontal x 60 degrees vertical (nominal)
– Equalization: Contour EQ: Contour switch with +3 dB bass and treble boost.
– Connectors :
– (2) combo XLR/TRS 1/4″ (6.35 mm) inputs.
– (1) XLR Link Output
– (1) IEC power cable input.
– Controls: Power switch, (2) volume adjustment knobs (1 per input), Contour EQ switch, Ground-Lift switch
– Indicators: Power LED (rear panel), Clip Limiter LED
– Protection: Electronic clip, thermal overload, and transducer overload.
Power:
– Connection: IEC
– Input Voltage: 100 V~, 110-120 V~, 220-240 V~; 50/60 Hz (switchable).
– Fuse: 100-120V T10AL AC250V / 220-240V T5AL AC250V
– Power Consumption: 800W.
– Enclosure: Trapezoidal injection-molded polypropylene enclosure, with perforations, steel grille.
– Mounting Standard: 36 mm pole socket
– Dimensions (H x L x P) : 434 x 256 x 245 mm / 17,1″ x 10,1″ x 9,6″.
– Weight: 9.2 kg / 20.2 pds