Alesis – Amplified Speaker for Electronic Drum – StrikeAmp 12


2 in stock

SKU: STRIKEAMP12XUS Categories: , , , , Product ID: 65957


Amplified Speaker for Electronic Drum – StrikeAmp 12

You have worked hard to perfect your style. It’s yours and yours alone. You have your favorite drumsticks, just the right weight and length. You love playing those long triplets. No one will mistake your playing for someone else’s. The same goes for your sound; it must be uniquely yours. You’ve honed everything in your playing to be “just right.” Don’t entrust your sound to an ordinary speaker. You need the Alesis Strike Amp 12 drum speaker.

2000 watts of room-shaking power
With 2000 watts of explosive bi-amplified power and high-performance transducers, this speaker will always play loud and proud, in any space, in any situation, whether you’re on stage, recording, or rehearsing. The rugged 12-inch low-frequency speaker really adds the “kick” to the kick drum. And the high-frequency compression driver with its computer-optimized waveguide delivers all the brightness and snap of your snare drum and cymbals. The power. Precision. Drama. Using the Strike Amp 12 is like driving a race car that’s absolutely glued to the track and never runs out of power. HFS.

A plethora of features – The BEST amp to power your drums!
But this speaker is much more than just raw power. Much more indeed. The Strike Amp 12 has all the versatility and features needed to fit into any location, and it’s a breeze to set up and use. You can use it vertically or tilt it horizontally like a stage monitor. There’s an XLR output to connect another Strike Amp 12 or send your performances to another input device. Need to customize the sound for that “just right” tone? Use the Contour EQ control. Furthermore, the (2) combination XLR/TRS 1/4″ inputs with independent volume controls and clip indicator offer virtually limitless connection versatility, and you’ll never inadvertently drive the speaker into distortion.

With its sleek and refined appearance, lightweight yet robust construction, and versatile user interface, the Strike Amp 12 is the ideal amplified drum speaker for anyone playing an electronic kit. You’re not just any drummer. Don’t settle for just any speaker.


– 2000 watts of peak power for clarity, peak performance, and more than enough headroom for any performance space or venue.
practice space.
– The 12-inch woofer and specially designed high-frequency compression driver for drum sound reinforcement provide accurate and full-range response without any artificial coloration.
– (2) Combination XLR/TRS 1/4-inch inputs with independent volume controls and clip indicator.
– XLR output to connect another Strike 12 amp or send your performances to another input device.
– Tilt-back cabinet design, lightweight and versatile, can also be pole-mounted.
– Contour EQ switch to control your sound.
– The Ground-Lift switch eliminates unwanted noise.

Technical Specifications:

Output Power: 2000 W (Peak, 1300 LF + 700 HF), 1000 W (Continuous RMS, 650 LF + 350 HF)

Woofer :

– Low-Frequency Speaker: 12.0 inches (305 mm) low-frequency driver with a high-temperature 3.0 inches (76 mm) voice coil.
– High-Frequency Driver: 1.4 inches (35 mm) high-frequency compression driver with a neodymium magnet and a high-frequency horn with precision waveguide.
– Crossover Frequency: 2.0 kHz.
– Maximum SPL: 131 dB (peak), 128 dB (continuous) (dB-SPL @ 1 m).
– Frequency Response: 53 Hz – 20 kHz (+3 dB).
– Frequency Range: 46 Hz – 22 kHz (-10 dB).
– Horn Coverage: 90°. horizontal x 60? vertical (nominal)
– Equalization: Contour switch with +3 dB bass and treble boost.

Connectors :

– (2) combo XLR/TRS 1/4″ (6.35 mm) inputs.
– (1) XLR link output.
– (1) IEC power cable input.

– Controls: Power switch, (2) volume adjustment knobs (1 per input), EQ contour switch, Ground-Lift switch.
– Indicators: (2) Power LEDs (1 front panel, 1 rear panel), Clipping Limit LED.
– Protection: Electronic Clip, Thermal Overdrive, Transducer.
– Power Connection: IEC.
– Input Voltage: 100 V~, 110-120 V~, 220-240 V~; 50/60 Hz (switchable).
– Fuse: 100-120V T10AL AC250V, 220-240V T5AL AC250V.
– Power Consumption: 800W.
– Dimensions: 23.8″ x 13.9″ x 13.8″ / 605 x 354 x 350 mm.
– Weight: 35.9 in. / 16,3 kg



Additional information

Weight 18.3 kg
Dimensions 61 × 39 × 39 cm
.single-post .post_info_item post_info_posted { display: none!important; }