Description
Adding a subwoofer to full-range speakers allows you to hear low frequencies more accurately, which are the foundation of your mix, enabling you to make more informed decisions and create better translatable mixes.
With its incredible 100-watt power, the Eris® Sub 8BT goes down to 30 Hz, allowing you to hear the entire sound spectrum and produce better mixes.
For EDM and hip-hop producers in particular, a subwoofer is essential. Although it is compatible with a wide variety of full-range studio monitors, the Eris Sub 8BT is designed to complement the sound profile and frequency response of the compact full-range Eris studio monitors, from the ultra-affordable Eris 3.5 to the Eris Studio 5.
The Eris Sub 8BT, the first PreSonus® studio subwoofer to offer wireless connectivity via Bluetooth® 5.0, also provides a choice of wired connections, making it easy to add to any monitoring setup. The integrated controls allow you to easily create a 2.1 monitoring system and adapt it to your room.
A high-pass filter and a low-pass filter (crossover) ensure that the Eris Sub 8BT starts operating precisely at the frequency where your main monitors stop, preventing the muddiness of a confused and blurred low end that would result from the absence of a crossover.
Add a PreSonus Eris Sub 8BT subwoofer to your compact full-range system and experience the powerful low frequencies you were missing with great fidelity.
Features:
– 8″ (20.3 cm) composite low-frequency driver
– Bluetooth® 5.0 wireless stereo audio input
– 50W Class AB power amplifier
– Frequency response from 30 to 200 Hz
– Sound pressure level (SPL) of 100 dB (peak at 1 meter)
– Continuous variable low-pass filter (from 50 to 130 Hz)
– The switchable high-pass filter removes frequencies below 80 Hz from the full-range signal sent by the outputs of the Eris® Sub 8BT to the main speakers.
– Main left and right inputs, balanced on 6.35 mm TRS jacks and unbalanced on RCA.
– Left and right loop outputs on balanced 6.35 mm TRS jacks and unbalanced RCA for connecting satellite speakers.
– Polarity inverter
– Protection: Radio frequency interference, output current limiting, overheating, power on/off transients, subsonic filter
– Energy-saving mode (activates after 40 minutes without signal)
Général:
– Séries: Eris®
– Color: Black
– Country of origin: CN
Électronics :
– Voltage: 120V
– Input impedance: 10 kΩ
Performance:
– Maximum sound pressure level: 100 dB (@ 1 meter)
Material:
– Enclosure Material: Laminated vinyl, medium-density fiberboard panel
Audio Controls:
– Volume Range (-30 dB to +6 dB)
– High-pass filter (80 Hz @ -12 dB/octave)
– Low-pass filter (50 Hz to 130 Hz, continuously variable)
– Polarity (0 degrees or 180 degrees)
Audio switches
– Polarity switch: 0 degrees or 180 degrees
– Ground lift switch: On/Off
– High-pass filter switch: On/Off
– Bypass pedal: On/Off
Monitor input:
– Monitor type: Active subwoofer
– Power amplifier type: Class AB
Measurements:
– Dimensions: 13.30 x 15.90 x 16.80 inches
– Shipping weight: 16.30 pounds
– Product depth: 12.7 inches (32.3 cm)
– Product height: 11.77 inches (299 mm)
– Product width: 9.8 inches (25.0 cm)
– Shipping length: 16.80 inches
– Shipping height: 13.30 inches
– Shipping width: 15.90 inches
Accessories:
– Switching pedal: N/A
Miscellaneous:
– Power cable: IEC
– Low-pass filter frequency: 50 – 130 Hz (Variable)
protections
– RF interference
– Output current limitation due to overheating
– Transient power on/off
– Subsonic filter